April 24 2014, 1 hour

I took a break from the normal building process to play with the gadgets. I decided to partially setup the Dynon-10A. I set up the MAGINT (47290) (Intensity – Total Field) and the MAGINC (+58.5) (Inclinantion). These settings are from the NOAA website.

SETTING MAGNETIC INCLINATION ANGLE AND INTENSITY (REQUIRED) To calibrate your EFIS-D10A heading, you must input your location’s current magnetic inclination angle and intensity. Before doing this, you must obtain these two values for the geographic location where you will be performing the calibration.

From Dynon’s website link:
IMPORTANT: The two values needed from the following page are INCLINATION and TOTAL FIELD. Horizontal Intensity is NOT used.